Search ICI Store here...
View Cart

Join Our Newsletter!
Your E-mail..

Subscribe
Un-Subscribe

Press:
Read about Immaculate Connections in the October 2003 issue of ProSoundNews page 53!

"It's always best to do it right the first time" ~MR

 

Web Design & Graphics by OM

Store Item Materials and Options
  1. XLR'S

    • NEUTRIK NC3FXX, female cable connector, nickel housing, silver contacts.

    • NEUTRIK NC3FXX-B, female cable connector, black metal housing, gold contacts.

    • NEUTRIK NC3MXX, male cable connector, nickel housing, silver contacts.

    • NEUTRIK NC3MXX-B, male cable connector, black metal housing, gold contacts.

    About the Neutrik XX Series XLR's, from Neutrik's site: "The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief". Features:

    • Sleek and ergonomic design - valuable and handy
    • Rugged zinc diecast shell, longlasting and dependable
    • Internal thread on shell is well proteced against any damage
    • Boot with polyurethane gland gives high protection to cable bending stresses
    • Improved chuck type strain relief provides higher pull-out force
    • Additional ground spring contacts for better shell ground continuity
    • Female connector with improved solid metal latch which is larger and easier to handle
    • Unique cage design of female contact for low contact resistance and high integrity

  2. 1/4" PHONE PLUGS

    • NEUTRIK NP3X, 1/4" TRS professional phone plug, nickel contacts, nickel shell.

    • NEUTRIK NP3X-BAG, 1/4" TRS professional phone plug, nickel contacts, black shell.

    • NEUTRIK NP3X-B, 1/4" TRS professional phone plug, gold contacts, black shell.

    • NEUTRIK NP2X, 1/4" TS professional phone plug, nickel contacts, nickel shell.

    • NEUTRIK NP2X-BAG, 1/4" TS professional phone plug, nickel contacts, black shell.

    • NEUTRIK NP2X-B, 1/4" TS professional phone plug, gold contacts, black shell.

    From Neutrik's site: "The heavy duty professional phone plug series offers the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch).The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

    The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks". Features & Benefits:

    • Extra slim 1/4" plug for highest packing density
    • Robust diecast shell in stylish design
    • Proven chuck type strain relief for reliable cable retention
    • Sleek design for best handling convenience
    • Precision machined one-piece contacts - avoid hook up of tip contact

  3. CABLE TYPES

    • Gepco GA724xxGFC series analog snake cable.
      • Low Attenuation & Crosstalk
      • Flexible All-weather GEP-FLEX Master Jacket
      • Color Coded & Alphanumeric Pair Identification
      • Individually Shielded & Jacketed Pairs
      • Additional Overall Foil Shield
      • Polyethylene Dielectric
      • 24 AWG stranded (7x32) Tinned Copper conductor
      • 24 AWG Tinned Copper drain wire to block EMI and RFI interference
      • Overall Common Drain Wire 20 AWG (19x32) Stranded Tinned Copper
      • NEC(UL) Spec: CM
      • Overall Outer Diameter = 0.500 inch

    • Belden 15xx series analog snake cable.
      • Easy to read numbered/color-coded PVC jackets
      • Flexible and durable outer jacket
      • Individually shielded Beldfoil ® (100% coverage) and overall Beldfoil shield
      • 24 AWG stranded (7x32) Tinned Copper conductor
      • 24 AWG Tinned Copper drain wire to block EMI and RFI interference
      • NEC(UL) Spec: CM, CEC/C(UL) Spec: CM
      • Overall Outer Diameter = 0.452 inch

    • Mogami 29xx series analog snake cable.
      • XLPE (Cross Linked Polyethylene) insulation provides superb electrical characteristics. Rugged and flexible construction that is easy to handle, even at temperatures down to -20C (-4F).
      • Channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped. Outer jackets of each pair are color coded by standard resistor color code, allowing quick identification of conductor pairs. Inner conductors are also color coded based on the international standard resistor color code. Each pair is color coded by jacket and conductor color combination. Each channel has a drain wire and served (spiral) bare copper shield. The drain wire simplify termination and can be crimped by the same size contact as the inner conductor pair.
      • 100% copper braid shield.
      • Long term flexible performance.
      • Capacitance: 3.7pf/ft.
      • EZ-ID.
      • Conductor Gauge #26AWG
      • Oxygen Free Copper.

  4. DB25 HOOD OPTIONS
    • Metal hood, comes standard. Offers durability and shielding.
    • Metal hood with thumbscrews. For easy connect/disconnect.
    • Plastic hood with thumbscrews. Economy hood for easy connect/disconnect.

  5. XLR AND 1/4" PHONE CONNECTOR END TREATMENTS
    • Custom, machine printed labels can be added on each channel end. Can be as simple as designating channel numbers or as custom as actual function of the signal on that channel. Please be specific in the Labels Boxes below the options as to what you want your labels to have printed on them.
    • Braided Tech Flex Sleeving (Flexo) can be installed over each channel. The Tech Flex does a great job of preventing tangles and looks really good, especially on stage. Used primarliy for snake cables that are connected and disconnected a lot, or that need protection. This option also comes with custom, machine printed labels on each channel end.

  6. CABLE END TREATMENTS
    • A Kellums Grip may be added to one or both ends of the snake cable. This is a wire mesh device that fits over the end of the snake. It has a loop attached to it for cable support and strain releaf.

  7. SNAKE LABELING
    • These are labels that live on the overall jacket of the snake, on one end or both. You can have all types of info printed on these such as cable function and Studio/Theater/Artist/Station/Church/Owner's Name.

  8. SOLDER TYPE
    • Instead of the normal solder used we can use WBT-0800, the highest quality silver solder, with 4% fine silver content. The halogen-free flux is gentle on precious metal surfaces and the melting temperature is extremely low (356F/180C).
    • This is some of the best solder out there. It works very well at conducting high frequecy signal and a lot of our customers always use it.
Partial list of equipment and manufacturers that use the Industry Standard DB25 connection:

  • Digidesign Pro Tools 192, Control 24, Pro Control
  • Tascam DA88, DA98, etc.
  • Apogee AD-16X, DA-16X
  • Neve 8816
  • IZ Radar
  • Dangerous Monitor ST
  • Mackie D8B, Onyx 800R 8 Chan Mic Pre, Onyx 1640, 1220, 1620 Mixer
  • Yamaha Digital Mixers
  • SSL AWS900
  • SPL Surround Monitor Controller Model 2489


  •  

    We Accept

    Browse... Microphone Cables | Instrument Cables | DB25 Cables | Custom Wiring | 2 Channel Line Level
    ProTools Wiring | iHookup | Gift Certificates Now Available! | View All Products
    View Shopping Cart

    about us | cabling | studio detailing | installs | history | gallery | tools | contact | web & graphic design
    Copyright ©2003 Immaculate Connections Incorporated